| [Software\Piriform\Defraggler] |
INI file header. |
Do not modify. |
| MainWindowTopSplitterProportionalPos |
Vertical proportion of Drive section of Defraggler to the entire program window.
|
Determines how tall the Drive section is compared to the entire Defraggler window. This number plus the next number must add up to 5693.
Example: setting this number to 500 means that the Drive section would be 500/5693 * 100 = 8.8% of the vertical height of the program window. The next number would have to be set to (5693 - 500) = 5193.
|
| MainWindowBottomSplitterProportionalPos |
Vertical proportion of Drive Map section of Defraggler to the entire program window. |
Determines how tall the Drive Map section is compared to the entire Defraggler window. This number plus the previous number must add up to 5693. |
| UpdateCheck |
Binary flag for Defraggler's auto-check. |
0=Defraggler does not automatically check for an update when it starts.
1=Defraggler checks for an update on start (Internet connection required).
|
| UpdateKey |
The date and time Defraggler last checked for an update. |
In this format YYYYMMDD
|
| UpdateFrequency |
How often the Defraggler main window will be updated during the defrag procedure.
|
This number is in milliseconds, and by default is 10 ms.
|
| InstallPath |
Path
|
Shows the path where Defraggler has been installed. The default path is: C:\Program Files\Defraggler.
|
| Executable |
Name of executable file.
|
Do not modify.
|
| CleanupDriveBeforeDefrag |
Binary flag.
|
1 = Defraggler empties Recycle Bin before defragging
0 = Recycle bin is not being emptied before defragging
|
| ShowCleanupPrompt |
Binary flag.
|
1 = Defraggler displays dialog box to clean up Recycle bin before defragging
0 = Defraggler starts defragging without asking about empting recycle bin
|
| Priority |
Priority level |
Priority of this process. Priority can be modified in Settings > Priority
|
| CacheFileCollectionAfterDriveSwitch |
Binary flag.
|
1 = Defraggler caches data obtained from analysis during drive change
0 = During drive change defraggler loses information from previous drive analysis
|
| DisableShellExtension |
Binary flag.
|
1 = Special Defraggler menu will be seen when you right-click on any file or folder.
0 = Special Defraggler menu won't be seen when you right-click on any file or folder.
For more info about Shell Extension, go here.
|
| ReplaceWindowsDefrag |
Binary flag.
|
1 = Defraggler will open instead of original one disk defragmenter.
0 = Windows Disk Defragmenter will be opened.
For more info about replacement of Windows Disk Defragmenter, go here.
|
| PreviousDefragPath |
Path
|
Shows the path of previous used defragemnter.
|
| ShowFragmentedFolderEntries |
Binary flag.
|
1 = Displays fragmented folder entries (indices)
0 = Does not show fragmented folder entries
|
| MoveLargeFilesToEndOfDrive |
Binary flag. |
1 = Moves large files as set in the Options to the end of the hard drive being defragmented.
0 = Defragments drive without moving large files.
|
| MinLargeFileSize |
The minimum file size for Defraggler to use when selecting files to move to the end of the drive.
|
This number is in MB. For example, setting it to 250 would mean Defraggler would only move files larger than 250MB.
|
| MoveOnlySelectedLargeFilesCategories |
Binary flag. |
1 = Moves only large files that belong to categories specified in the Options.
0 = Moves all files.
|
| LargeFilesCategories |
|
Lists the categories of large files for Defraggler to move, all on one line. To add a new category, use the following syntax:
<Name>;[selection flag]|
Example 1: Test;1| This would create a new category called Test that would have a check box by default.
Example 1: New;2| This would create a new category called New that would not be selected by default.
If you create a new category, you must add extensions to it in the next entry.
|
| LargeFilesExtensions |
|
Lists the file extensions for the large file categories for Defraggler, all on one line. To add a new set of file extensions, use the following syntax:
<*.[ext1]|*.[ext2]|etc.
Example: <*.tst|*.ts2 This would include files with the extensions .TST and .TS2.
Note: The order of the set of file extensions corresponds to the order of the categories in the entry above. For example, if your new category is fifth in the category list, its extensions must be fifth in the extension list.
Note #2: Do not precede the first set of extensions with a left-angled bracket ( < ).
|
| DefragFreeSpaceMoveLargeFiles |
Binary flag.
|
1 = Moves large files while defragmenting your free space.
0 = Leaves large failes alone while defragmenting your free space.
|
| NativeMode |
Numbers from 0-2
|
Boot Time defrag run mode:
0 = disable
1 = run once
2 = run everytime
|
| EnableNativeDefrag |
Binary flag.
|
1 = enable native defrag
0 = disable native defrag
|
| QDUseCustomParameters |
Binary flag.
|
1 = custom rules for Quick Defrag are set
0 = default rules for Quick Defrag are set
|
| QDMinFragmentSize |
Number in range: 1-2147483646
|
The minimum number of fragments for Defraggler to make a quick defrag.
|
| QDMaxFragmentCount |
Number in range: 1-2147483646
|
Defraggler quick-defrags only the files which have more fragments than set number.
|
| QDMinFileSize |
Number in range: 1-2147483646
|
Defraggler-quick defrags only the files that are larger than set value.
|
| QDMaxFileSize |
Number in range: 1-2147483646
|
Defraggler quick-defrags the only files that are smaller than set value.
|
| FFPolicy0 |
Fragmented Files Policy
|
Rule which can be set, to exclude restore point files from defragmentation
WC:1 = restore point files are excluded from defragmentation
WC:0 = restore point files are included in defragmentation
|
| FFPolicy1 |
Fragmented Files Policy
|
Rule which can be set, to exclude hibernation file from defragmentation
WC:1 = hibernation file is excluded from defragmentation
WC:0 = hibernation file is included in defragmentation
|
| Language=1033 |
The locale ID for Defraggler's current display language. |
For a list of locale IDs, see http://support.microsoft.com/kb/221435. For a list of Defraggler's supported languages, see this topic. |
| DriveMapColors |
Decimal colors. |
Decimal representation of colors of the drive map. |
| DriveMapSettingsMode |
Binary flag.
|
Shows view of drive map
0 = Modern View
1 = Original View
2 = Custom View
|
DriveMapMinBlockWidth
|
Number in range: 1-19
|
Block width on drive map. |
DriveMapMinBlockHeight
|
Number in range: 1-19
|
Block height on drive map. |
DriveMapMode
|
Binary flag.
|
Drive map will be displayed according to Custom View.
0 = Blocks
1 = Bars
|
DriveMapDrawingMode
|
Binary flag.
|
Drive map will be displayed according to Custom View.
0 = Plain
1 = Gradient
|
DefragContextString
|
Name of string in context menu.
|
Do not modify. |
AnalyzeContextString
|
Name of string in context menu.
|
Do not modify. |
window_left
|
The position of the left edge of the Defraggler window, in pixels.
|
|
window_top
|
The position of the top edge of the Defraggler window, in pixels. |
|
window_width
|
The width of the Defraggler window, in pixels. |
|
| window_height |
The height of the Defraggler window, in pixels. |
|
| window_max |
Binary flag.
|
1 = Defraggler window is maximized.
0 = Defraggler window is not maximized.
|
| filelist_columns |
The width of the file list columns in pixels.
|
|
